Anode questions.
1. How tight do folks tighten your anode? (I use Teflon tape on threads and screw it in till finger tight, then little tiny two finger tap on end of socket wrench). 2. When not in use I drain...
Forum Discussion
sarojg wrote:
Thanks... guess I'll have to find out where it is. :o)
With the outside panel open, the drain plug will be near the bottom towards the left side as you face the heater. As said, if it's a Suburban heater, the anode will be attached to the inside end of the drain plug. If the plug is nylon or CPVC it's an Atwood heater and does not use an anode. There should be a sticker on the heater with the make & model info. With that information, we can direct you to an owners/service manual for it.
