Caulk remover

[Wisconsin_Bums]

Have slide out that has real hard caulk on it.used a plastic putty knife, does not work.I do not want to ruin the clear coat on the slide out. Help

[Garry_Gayle]

Use the tool in the Homax kit, lay your bead of caulk then spray the area with soapy water then using the tool smooth; several youtube videos on this method.

[Veebyes]

When you replace it & want a smooth bead here is a trick. You can never get it smooth & neat with just the gun.

Tape either side. Apply, not too much. Smooth over with an ice cube. It will not drag like a tool.

[Garry_Gayle]

Got this from Lowes it works pretty well along with heat gun.

Clkicky

[Veebyes]

Hair dryer or heat gun on low heat to soften it up. Scrape with a hard plastic putty knife or credit card. Laquer thinners to clean up the residue. There is no magic easy way.

[Trackrig]

From about six months ago.

Clicky

Bill