Correct way to start Onan 4K generator
What is the correct way to start Onan 4K generator? My generator won't start unless I press and hold the start button for about 30 seconds to 45 seconds. Is that considered over-cranking? I can also p...
Forum Discussion
My current one and my previous one were the same way. It take an ungodly long time to prime them. And it seems no matter how long I prime, it still won't fire up without a few tries at cranking.
I have suspected the choke is set too lean but have not gotten around to looking at it. I downloaded the service manual and will eventually check the choke adjustment.
If not the choke, then it's a poor design in some way. Maybe emissions tuning has created this problem. Again though, the choke should take care of that.
I have suspected the choke is set too lean but have not gotten around to looking at it. I downloaded the service manual and will eventually check the choke adjustment.
If not the choke, then it's a poor design in some way. Maybe emissions tuning has created this problem. Again though, the choke should take care of that.
