Stabilizing Wildwood 4092BFL
My wife and I recently purchased a new Wildwood 4092BFL which is sitting on a seasonal site (we won't be moving it). After spending the first night in the RV I noticed there is side to side motion ...
Forum Discussion
I would try the jacks first, before lowering the tire pressure. Lower the front jack, that came with the trailer, down so that the rear is about 2" higher than the front. Place the jack stands you bought, under the rear, and then jack the front back up to level. This will preload the rears. Install the front jack stands and then install the extra stands in the middle. That should be plenty to stabilize the trailer.
