Chris Bryant wrote:thank you
I believe you have to remove the panel, it's been a while.
Chris Bryant wrote:you would think, but it doesn't want to come off so it might not be. I've broke many things like that in my 72 years and it creates another problem. I gave it a good try to pull it off, no luck.
I would bet on the knob. The rod is aluminum.
Old-Biscuit wrote:Got all that, thanks.
Exploded view of PARTS
donn0128 wrote:Knobs do not pull off, tried with needle nose pliers, do not want to force it but gave good pull and wiggle. Have set so just waiting to see how it cools. that takes awhile as there so slow to cool.
Pull the knob off and look. Plastic knobs tend to break after a while.
navegator wrote:I undid the screws but the panel doesn't come right off. It appears like the door has to be removed as the pins go into that panel. The knob turns 360 where it use to stop when you got to Max.on the temp.
Take the 2 screws off and carefully remove the panel to take a look, if nothing shows place panel back and return screws to holes and tighten, do not over tighten.
navegator
