E2 Hitch/Unhitch on non-level spot
This past weekend, I was on an very unlevel spot. The TT was level but the tongue was very close to the ground; truck was quite nose high when hitching and unhitching. Had to raise the tongue VERY h...
Forum Discussion
Dutchmen, I know your equal-i-zer is gone, but for others that might read this I wanted to add to what Barney is saying about the bolt.
You probably ran into a problem because of a few things. First it sounds like your side bolts were loose as the head was able to pivot up and down with the hitch weight. And second, if you put the bars on so the head is under tension upwards; The bolt will unload so you can tighten it down and take up the slop also preventing the pivot.
You probably ran into a problem because of a few things. First it sounds like your side bolts were loose as the head was able to pivot up and down with the hitch weight. And second, if you put the bars on so the head is under tension upwards; The bolt will unload so you can tighten it down and take up the slop also preventing the pivot.
