For that have added a second AC yourself.
My 5er is prewired for a second AC, and I'll be using/removing the vent . Not planning on running both at same time as we're seasonal on 30amp service. So my questions are how difficult of a job i...
Forum Discussion
Make sure that the power is off or better unplug the shore power cord now when you remove the vent, clean the roof area of any sealing putty, the seal for the air/con looks like packing material, place this where thec a/c is going to sit place a/c unit on top of sealing material.
Go inside and center the outside unit so that the four screw holes are accesible, now bring the bottom unit up and insert the bolts into the upper unit, position both units within the apperture and tighten the bolts, make sure that the air ducts are not blocked by any obstruction on the ceiling, the bolts need to be really tight to compress the sealing materiel.
Now hook up the power cable to the unit according to the color code, green to the metal frame, white to white screw and black to the black screw, now place the cover with the filter, the instalation is complete hook the shore cable and enjoy.
navegator
Go inside and center the outside unit so that the four screw holes are accesible, now bring the bottom unit up and insert the bolts into the upper unit, position both units within the apperture and tighten the bolts, make sure that the air ducts are not blocked by any obstruction on the ceiling, the bolts need to be really tight to compress the sealing materiel.
Now hook up the power cable to the unit according to the color code, green to the metal frame, white to white screw and black to the black screw, now place the cover with the filter, the instalation is complete hook the shore cable and enjoy.
navegator
