Frameless windows question

JKJavelin wrote:
One thing about the frameless windows that I don't like is that they don't swing out very far. I got this idea from someone else on the internet, except I used 3/4" electrical PVC conduit, which happens to be Open Range gray. Just cut it to the length you want, and I used a 45 degree elbow, cut the end for the correct angle, leaving a tab to fit into the emergency window slot. The window handle slides all the way into the conduit snugly. I made 2 of these for the living area and it cost about $5. I may add pins if I get worried about the wind.



I've now used these a bunch of times over the summer and they work great.

Thanks for the post. I like that idea. My wheels are turning one step further and make the prop adjustable. LOL

I have Hehr frameless windows on an eleven year old trailer. I like the look and deal with the small openings by using the fan. Leaving them open in the rain is a nice feature especially in the Northwest. I had one leak due to a misalignment of a seal; some foam tape fixed that. One of the opener mechanisms came unglued from the glass. Gorilla glue made it good as new.

I use Meguires water spot remover to remove the spots on my windows with an electric buffer. Frameless windows makes the job a breeze as you can buff to the very edge of the glass. If I was ever again in the market, I wouldn't hesitate to get frameless windows.

Thanks JK.

One thing about the frameless windows that I don't like is that they don't swing out very far. I got this idea from someone else on the internet, except I used 3/4" electrical PVC conduit, which happens to be Open Range gray. Just cut it to the length you want, and I used a 45 degree elbow, cut the end for the correct angle, leaving a tab to fit into the emergency window slot. The window handle slides all the way into the conduit snugly. I made 2 of these for the living area and it cost about $5. I may add pins if I get worried about the wind.



I've now used these a bunch of times over the summer and they work great.

JK I can’t log in. Could you please post a photo.

We even got the " dual pane " windows. These have been great as they don't sweat. The only real negative that I've heard on the frame-less is that they are more prone to breakage if struck on the edge. I have not talked to anyone where this actually happened. I have one window near the door that I don't open to far due to this. On top of that they made the door with out any securing hardware. Future Mod.

Last spring I helped a guy at the campground fit up a piece of plywood to temporarily replace a swing out panel on one of his frameless windows that dropped to the ground in the middle of the night.

Tin-bender wrote:
I also worried about "no breeze" because of the narrow opening abilitty of them but like the salesman said, "turn the Fantastic Fan on low and you have all the breeze you need" Darned if he wasn't right.
Tinbender

The emergency exit windows swing wide open, so I made a couple of these:
https://www.openrangeowners.com/ORforum/viewtopic.php?f=26&t=24604
JK

Double post

Tin-bender wrote:
I also worried about "no breeze" because of the narrow opening abilitty of them but like the salesman said, "turn the Fantastic Fan on low and you have all the breeze you need" Darned if he wasn't right.
Tinbender

LOL Kind of what I was thinking.