Fuel level sensor for GM P30 454 Chassis
How do I get to the sensor? Mine doesn't respond according to tank level. I checked it to make sure wiring is OK by using a dummy resistor and the guage does respond. Does the tank have to be dr...
Forum Discussion
The fuel tank sits above the fresh water tank. I ran a temp (ground wire) while watching the guage at the dash panel.
There is nothing between the plywood floor and the steel tank. The fresh water tank is fiber glass.
I used a trim pot (variable resistor) to simulate the built in varying resistance of the sensor assembly.
The dash indicator does respond accordingly.
It's a Fleetwood Bounder '86 Model.
There is nothing between the plywood floor and the steel tank. The fresh water tank is fiber glass.
I used a trim pot (variable resistor) to simulate the built in varying resistance of the sensor assembly.
The dash indicator does respond accordingly.
It's a Fleetwood Bounder '86 Model.
