Getting Rid of my Dual Cam system
I really like this system but it's such a darn pain. It's so complex no one, anywhere, has any idea how to adjust it or install it. I just had it transferred to a new trailer and new bars also were...
Forum Discussion
Housedad wrote:LITEPHIL wrote:Fisherguy wrote:
Mike, if the extra holes are that important to you they should weld up the old ones for you, grind them down and paint the A-Frame.
I still think the Reese is the way to go (with trunnion bars though)
Welding up the holes would more than likeley distort the frame in that area. I still think he should just get the Reese system dialed in. Its a really nice set up and really isn't that hard to set up.
Welding up holes on tubular trailer frames is done all the time.
If you take a piece of square tubing stock,drill a hole and weld it up,it will bow in the direction of the welded area. Better off leaving it alone or putting a bolt with a nut and a couple of flat washers in the holes. Fact
