Help! Lippert six point
If anyone can help with problem it would be greatly appreciated. I am trying to move my trailer and the lippert six point will not retract the landing gear. It extends it as I had to lift up the tra...
Forum Discussion
red_neck_camper wrote:
There are docs up on the Lippert site that explain (with pictures) how to manually run the pump to extend/retract the landing gear/slides/levelers with a drill. The key step is to manually close the appropriate hydraulic valve (use a hex wrench) that controls the item you want to move. Then, spin the pump one direction to extend or the other way to retract. If you don't close that valve, spinning the pump will do nothing.
Ken
It makes sense that there should have been a valve to close and then using the drill for the retraction. I pulled off the only instructions on the net that I could find and they seemed generic insofar as explaining that. I have five slides (3 hydraulic) and the six point leveling system. The mail lines go into the valve manifold. From there it looks like one leg splits off for the three slides as there are three 'buttons' or 'knobs' for them. On the manifold there are solenoids with power running to them and they have a hex screw on them from what I can see, perhaps that's what you are talking about? Thanks.
