How to hang artwork on fiberglass shell?
My new van build has a raised fiberglass roof. I want to hang some artwork up there, but am not sure how to do it on the curved FG surface. I've thought of two solutions, but I don't like either o...
Forum Discussion
I might try foam double-stick mounting tape if you don't mind getting it on your artwork. It should come off of fiberglass gel coat with some elbow grease. If the artwork is relatively fragile when you go to unmount it, you should be able to saw through the foam part with a thin wire (preferably steel or bronze rather than copper; a guitar B or high E string might do well).
If you put some ferrous plates on the fiberglass at strategic locations, you could hang the artwork with rare earth magnets.
If you put some ferrous plates on the fiberglass at strategic locations, you could hang the artwork with rare earth magnets.
