Forum Discussion
7lazy77
Feb 19, 2017Explorer
The local RV dealer gave me a thermal couple to try. Switched it out & still no main burner. Not sure if it makes any difference or not, but the furnace originally had an aluminum thermal couple & the one they gave me was a copper one to try. Any difference?
I also removed the lower burner access door tonight & inspected the burner box for any obstructions such as wasp nests....didn't find anything other than a few pine needles & cleaned them out. Took off the pilot bracket to try to get to the orifice, but I couldn't get the orifice out, so I will plan on soaking it in alcohol overnight. Thanks again for everybody's input & help....hopefully I can figure it out & it is something other than replacing the entire valve unit.
I also removed the lower burner access door tonight & inspected the burner box for any obstructions such as wasp nests....didn't find anything other than a few pine needles & cleaned them out. Took off the pilot bracket to try to get to the orifice, but I couldn't get the orifice out, so I will plan on soaking it in alcohol overnight. Thanks again for everybody's input & help....hopefully I can figure it out & it is something other than replacing the entire valve unit.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,102 PostsLatest Activity: Jan 18, 2025