Forum Discussion

2_many_2's avatar
2_many_2
Explorer III
Jul 28, 2017

Need Help Finding 18" long 2-1/2 Sq WDH Shank With 6" Drop

I have an Equalizer 1200 lb. WDH, Equalizer Makes just what I need but only 12" long like This One

I called Equalizer and the tech said they do not make one that is 18" long yet. My new truck is 3-1/2" higher and has a 2-1/2" receiver so even with the 2" receiver adapter my current shank Like this one will still have the ball a little too high because it is only a 4" drop. I don't want to go back to a shorter 12" shank so my tailgate will not open.

I searched for a couple hours and I can usually find anything on the net, but no luck this time:h

Any suggestions would be greatly appreciated.
  • 2_many_2's avatar
    2_many_2
    Explorer III
    Jul 31, 2017
    neschultz wrote:
    Every 2 1/2" to 2" adapter sleeve I've ever seen states to not use it with a WDH. I'm not sure why. I definitely have less slop using the 2 1/2" shank than I had using the adapter with my original 2" equalizer shank.

    Thank you for the post.

    Darn it, another thing to research :E
    Nothing is easy :)
  • neschultz's avatar
    neschultz
    Explorer
    Jul 31, 2017
    Every 2 1/2" to 2" adapter sleeve I've ever seen states to not use it with a WDH. I'm not sure why. I definitely have less slop using the 2 1/2" shank than I had using the adapter with my original 2" equalizer shank.
  • lamopar's avatar
    lamopar
    Explorer
    Jul 30, 2017
    Thanks I did miss it. This unit looks perfect for what I need. I appreciate it.
  • 2_many_2's avatar
    2_many_2
    Explorer III
    Jul 30, 2017
    lamopar wrote:
    Thanks. I am trying to find a 2 1/2" bar to replace the unit I have with a drop like that. Seems to be real hard to locate. If you can use a 2" unit this looks like a good option.


    In case you missed it, the link I provided Here IS a 2-1/2 square shank. Sorry if you already knew this. But I have been having such a difficult time finding something to work, I did not want you to miss out if you did not see it IS a 2-1/2" :B

    I am just going to live with a 2" and use the adapter sleeve for now, until Equalizer or someone else comes up with a better solution.

    I don't trust any local welding shops to make one :(
  • lamopar's avatar
    lamopar
    Explorer
    Jul 30, 2017
    Thanks. I am trying to find a 2 1/2" bar to replace the unit I have with a drop like that. Seems to be real hard to locate. If you can use a 2" unit this looks like a good option.
  • 2_many_2's avatar
    2_many_2
    Explorer III
    Jul 30, 2017
    lamopar wrote:
    Please let me know if you figure something out. I just went from a 2500 Ram to a 3500 and my Reese Titan WD hitch is too high as well. My trailer is riding nose high and I can't find anything to fix it. My only idea has been to flip the trailer axles but that would make my ramp on my toy hauler very steep.


    This might work for you.

    I think my solution will be This

    Good luck
  • lamopar's avatar
    lamopar
    Explorer
    Jul 30, 2017
    Please let me know if you figure something out. I just went from a 2500 Ram to a 3500 and my Reese Titan WD hitch is too high as well. My trailer is riding nose high and I can't find anything to fix it. My only idea has been to flip the trailer axles but that would make my ramp on my toy hauler very steep.

About RV Tips & Tricks

Looking for advice before your next adventure? Look no further.25,111 PostsLatest Activity: Feb 18, 2025