Need Help Finding 18" long 2-1/2 Sq WDH Shank With 6" Drop

[2_many_2]

I have an Equalizer 1200 lb. WDH, Equalizer Makes just what I need but only 12" long like This One

I called Equalizer and the tech said they do not make one that is 18" long yet. My new truck is 3-1/2" higher and has a 2-1/2" receiver so even with the 2" receiver adapter my current shank Like this one will still have the ball a little too high because it is only a 4" drop. I don't want to go back to a shorter 12" shank so my tailgate will not open.

I searched for a couple hours and I can usually find anything on the net, but no luck this time:h

Any suggestions would be greatly appreciated.

[2_many_2]

neschultz wrote:
Every 2 1/2" to 2" adapter sleeve I've ever seen states to not use it with a WDH. I'm not sure why. I definitely have less slop using the 2 1/2" shank than I had using the adapter with my original 2" equalizer shank.

Thank you for the post.

Darn it, another thing to research :E
Nothing is easy 🙂

[neschultz]

Every 2 1/2" to 2" adapter sleeve I've ever seen states to not use it with a WDH. I'm not sure why. I definitely have less slop using the 2 1/2" shank than I had using the adapter with my original 2" equalizer shank.

[2_many_2]

:B

[lamopar]

Thanks I did miss it. This unit looks perfect for what I need. I appreciate it.

[2_many_2]

lamopar wrote:
Thanks. I am trying to find a 2 1/2" bar to replace the unit I have with a drop like that. Seems to be real hard to locate. If you can use a 2" unit this looks like a good option.

In case you missed it, the link I provided Here IS a 2-1/2 square shank. Sorry if you already knew this. But I have been having such a difficult time finding something to work, I did not want you to miss out if you did not see it IS a 2-1/2" :B

I am just going to live with a 2" and use the adapter sleeve for now, until Equalizer or someone else comes up with a better solution.

I don't trust any local welding shops to make one 😞

[lamopar]

Thanks. I am trying to find a 2 1/2" bar to replace the unit I have with a drop like that. Seems to be real hard to locate. If you can use a 2" unit this looks like a good option.

[2_many_2]

lamopar wrote:
Please let me know if you figure something out. I just went from a 2500 Ram to a 3500 and my Reese Titan WD hitch is too high as well. My trailer is riding nose high and I can't find anything to fix it. My only idea has been to flip the trailer axles but that would make my ramp on my toy hauler very steep.

This might work for you.

I think my solution will be This

Good luck

[lamopar]

Please let me know if you figure something out. I just went from a 2500 Ram to a 3500 and my Reese Titan WD hitch is too high as well. My trailer is riding nose high and I can't find anything to fix it. My only idea has been to flip the trailer axles but that would make my ramp on my toy hauler very steep.

[2_many_2]

Thank you for the replies. I will figure something out:h

[Dick_B]

Welding shop?

[neschultz]

I couldn't find a longer one either....Reese makes one but it won't work with the equalizer or others that use washers. I suggest the equalizer #90024900 2 1/2" hitch with a 6 inch drop and turn the tongue jack 90 degrees...that allowed me to put the tailgate down. I did have to drill and tap 3 new bolt holes for the jack.

[ymehp]

Amazon?