prodigy 2
I am going to replace the brake controller in my new to me 06 2500 chevy with a prodigy 2. not sure of the brand on old one but it has a harness to the factory wiring. do I need to get one with a new ...
Forum Discussion
Order the Harness to go with the Controller to make it a "Plug and Play" install.Also, make sure the Fuse is installed in the Fuse Panel under the hood.....I believe it is a 40 Amp in the "Stud 1" location, this sends constant 12 volt feed to the camper while towing.
