Quick Release Drive Shaft

Mine was installed at the Remco factory. One of the engineers showed me how to use he device. Grinding is normal and does zero damage. I removed the Remco when qwe sold the truck and the splines were perfect. However there is some minor maintemance that is required. Road grime can get into the open splines. Every 6 months I would get out the hose and spray the entire device. Then I would apply some Teflon lube to the splined gears and the moving parts. Worked perfectly. Some will tell you that it can reconnect or disconnect while driving. Impossible unless it never connected properly the first time. The comments about getting the correct vehicle are a little harsh. Let's say you must have a mid size compact pickup. There are only 2 in the market. Toyota and Nissan. Both require a disconnect. If you must have an automatic vehicle there are not that many choices. For smaller foreign SUV's only the Honda can be towed.