Receiver pin holes out of round.
Hello everyone. I have a 2010 Chevy Silverado 1500 with a tow capacity of 9200 lbs. My trailer is a 31' Tracer Touring model lite. Empty, it is under 7,000 lbs. Loaded, at most would be less than 77...
Forum Discussion
You will get that wear no matter what you do. I had that same wear on mine. it was on both sides of the receiver and I always put my bent hitch pin in from the left. so it is not due to the type of hitch pin. it is from the forces involved.
And I`ll bet you are closer to 8klbs than the 7700 you think you are at. although that is not your issue!
And I`ll bet you are closer to 8klbs than the 7700 you think you are at. although that is not your issue!
