Receiver pin holes out of round.
Hello everyone. I have a 2010 Chevy Silverado 1500 with a tow capacity of 9200 lbs. My trailer is a 31' Tracer Touring model lite. Empty, it is under 7,000 lbs. Loaded, at most would be less than 77...
Forum Discussion
Ivylog wrote:
I would have a welding shop drill 5/8th holes in 1/4"X2" flat stock and weld to your hitch. Actually I'd do it my self or drill the hitch and receiver holes out to 3/4".
I did the same with 3/8" flat stock on my OEM Ford receiver when I towed an 11.5K lb trailer.
I now use a SuperHitch that has the holes reinforced by design.
