See first post on Page 3.On each side of the tub/shower are little plastic discs of velcro that are screwed onto the fiberglass wall. I tried everything on the Velcro website and they are not listed anywhere. Do any of you know where I can get them. I am thinking of using them to hold the privacy shade cloth to the front of the rig. These have been on the moho since it was new and the velcro is still completly stuck to the disc. I've not had good luck with velcro stuck to surfaces that get hot. I did notice there is one that is fireproof but where can you buy it? I have contacted Velcro, USA but no reply yet. I dont want to use the metal tonneau cover type of holders or metal snaps.

There is a black Velcro called Industrial Strength. Once on and "set" for a day or two is almost impossible to remove. Don't ask how I know this....

How about these at Mc master-carrWorked for me. Let us know how if it worked out.

Go to a auto parts store ask for the Velcro disk for attaching gasket removing wheel to Drexel cut it to the size you need

They are called either "Velcro washers" or "Hook and loop washers". The opposite part is called a "Velcro dot" or "Hook and loop dot". You can find them just about anywhere. CLICKY

Mocoondo wrote:They are called either "Velcro washers" or "Hook and loop washers". The opposite part is called a "Velcro dot" or "Hook and loop dot". You can find them just about anywhere. CLICKYClicky working for anyone?

Screw on Velcro discs,update on velwashers | Good Sam Community

Snowman9000
Explorer
Jun 26, 2013
I just ordered a couple dozen of these today. Thanks again for the tip.
oldduffer
Explorer
Nov 23, 2012
You might want o clean the attachment spot with MEK first, possibly some other product, maybe alcohol? Medical not drinking kind!
D_E_Bishop
Explorer
Nov 16, 2012
Well the washers arrived today the 15th and they are exactly what I ordered. Heavy plactic disc with clear velcro hook material and a hole in the center. They are actually 55/64" but it will do what I want. There are 1 1/8" velwashers too but I think that would be too big and show up too much. I will use SS #6 sheet metal screws with a dab of sealant in the hole and arounf the screw.

Thanks for all the info and ideas. Cathy is very helpul and read off all the velwashers she had in stock. Nice lady and nice company.
D_E_Bishop
Explorer
Nov 08, 2012
I ordered twelve of the 7/8" beige, hook velwashers at $0.35 each. Cathy said they would be shipped via UPS today. We're going to San Diego camping with the grandkids for the week end, I'll report back Tuesday if they have come in. They also have 7/8 black, hook in stock.

She is really nice and helpful.
tork_d
Explorer
Nov 08, 2012
sbishop wrote:
Francesca Knowles wrote:
sbishop wrote:
I am thinking of using them to hold the privacy shade cloth to the front of the rig.

Are you talking about on the outside of the rig?

If so, I think velcro would load up with debris/dirt pretty fast- might not be the best fastener for the application!

Yes I am talking about on the outside. I will give it a try and let you know how it goes. Bugs would be the only thing I can think of that might mess them up.

To hershey,I guess I could make it out of wood but I don't want it to be to obvious and glueing velcro to wood may not be the best solution. Like I said I haven't had the best results glueing velcro in very hot locations.

just place the pile over the hook section to keep stuff from clogging up the hook.
jmtc
WishWeWereCampi
Explorer
Nov 08, 2012
These are also used in TrailManors, you could probably order some from the factory.

trailmanor.com
1775
Explorer
Nov 06, 2012
Wide Velcro strips, a pair of scissors or large round leather punch 3/4" or 1" diameter, and a screw - and you can make your own very easily.
D_E_Bishop
Explorer
Nov 06, 2012
For all of you that are interested, here is the website for a company in Elkhart, IN, of all places. They will sell in small quanities. number I used is 574-848-4393. Click on the Software link on the home page for product. Salesman is going to call tomorrow with costs.

Velwashers
Dakzuki
Explorer
Nov 06, 2012
I have found velcro doesn't like UV. Also the adhesive fails when it gets hot. I think screw snaps may be a better solution if you are intent on screwing something in. You can get stainless ones.
96Bounder30E
Explorer II
Nov 06, 2012
Here is a........Recent thread