Sewer Flush which one?

[icanon]

Need to replace my current sewer flush it's a Camco 39072-X RV Dual Flush 'leaking'.
Now I'm trying to decide between the Valterra F02-4320 Reverse Flush and the Camco 39062 RV Dual Flush Pro Holding Tank Rinser with Gate Valve.


Any comments? Thanks

[Bumpyroad]

poppin_fresh wrote:
!

Once you have it full-ish, pull the valve and watch how much more "stuff" comes out from the second or third dump. Yes, you could bring a hose through the trailer and stick it down the commode to do the same, but these are far easier IMO.

or you could use a swirilizer to do both jobs, fill tank and flush it out.
bumpy

[poppin_fresh]

Either one should be fine and while probably not a good as an in tank swirlerizer, I've been happy with the Camco for the last 3 years. You wont find the spray action does a whole lot, but the key is being able to shut the valve and back fill the black tank, just make sure you don't OVERFILL!

Once you have it full-ish, pull the valve and watch how much more "stuff" comes out from the second or third dump. Yes, you could bring a hose through the trailer and stick it down the commode to do the same, but these are far easier IMO.

[icanon]

LakeN wrote:
I have been using Flush King for years.....totally satisfied....easily gets the job done!! Recently had a friend get one, then he discovered we already had one. He said, "Why didn't you tell me about that thing??"

Thanks. Getting mine from Amazon next week, can't say I can't wait to try it out as sewer dumping isn't all that exciting hahahaha

[LakeN]

I have been using Flush King for years.....totally satisfied....easily gets the job done!! Recently had a friend get one, then he discovered we already had one. He said, "Why didn't you tell me about that thing??"

[icanon]

thanks for the replies. When this break or wears out I'll take another look at the 'spray nozzle' methods.

[time2roll]

Quickie Flush with custom spray pattern for me. Works well.

[rhagfo]

Bumpyroad wrote:
I'd install a spray nozzle in the end of the tank opposite the drain. makes more sense than "pushing a chain'.
bumpy

X2
I installed one of the in tank units, push it out not hope it floats out on the next tide. I also have two 90 degree bends in the line.

[icanon]

Thanks just ordered the Valterra.

[opnspaces]

I would probably go with the cheaper one.

[Bumpyroad]

I'd install a spray nozzle in the end of the tank opposite the drain. makes more sense than "pushing a chain'.
bumpy

[icanon]

Thanks 2oldman

[2oldman]

The Valterra is likely better quality.