signal light cameras

Maybe a piece of black tap over the eye on the camera would work.

et2 wrote:

teddodd wrote:

et2 wrote:
Ours can be turned on without the turn signal being used, but default to the turn signal when applied. I think I can shut them off, however it shuts the rear camera also. If I'm not mistaken there is a little access plate you can remove in the arm of the mirror. Take it off and you'll probably see the wires. Just disconnect and tape them off?

However it probably still won't show your toad when using the signal, the screen will just be blank.

I will want the back up camera to operate.

It will only be blank when you turn on the turn signal. It will go back to the toad after the turn.

Do you have the manual for the camera system? It might tell you how. If not call them and inquire if its possible to do what you want.

thinking of purchasing a color camera from tifffin so maybe can get some help from them.

teddodd wrote:

et2 wrote:
Ours can be turned on without the turn signal being used, but default to the turn signal when applied. I think I can shut them off, however it shuts the rear camera also. If I'm not mistaken there is a little access plate you can remove in the arm of the mirror. Take it off and you'll probably see the wires. Just disconnect and tape them off?

However it probably still won't show your toad when using the signal, the screen will just be blank.

I will want the back up camera to operate.

It will only be blank when you turn on the turn signal. It will go back to the toad after the turn.

Do you have the manual for the camera system? It might tell you how. If not call them and inquire if its possible to do what you want.

Tvov wrote:
Do you mean the side cameras that automatically turn on (and use the screen that is usually for your back camera) when you use a turn signal?

yes, you are correct.

et2 wrote:
Ours can be turned on without the turn signal being used, but default to the turn signal when applied. I think I can shut them off, however it shuts the rear camera also. If I'm not mistaken there is a little access plate you can remove in the arm of the mirror. Take it off and you'll probably see the wires. Just disconnect and tape them off?

However it probably still won't show your toad when using the signal, the screen will just be blank.

I will want the back up camera to operate.

Ours can be turned on without the turn signal being used, but default to the turn signal when applied. I think I can shut them off, however it shuts the rear camera also. If I'm not mistaken there is a little access plate you can remove in the arm of the mirror. Take it off and you'll probably see the wires. Just disconnect and tape them off?

However it probably still won't show your toad when using the signal, the screen will just be blank.

crabbin cabin wrote:
??? cameras in signal lights? Who has heard of those/has them?

See above post.

While i don't have a MH with them yet, it would be nice if you could turn them on/off when needed!

Do you mean the side cameras that automatically turn on (and use the screen that is usually for your back camera) when you use a turn signal?

Sometmes I have a short panic attack going around a corner. I look at the camera for my jeep's position and don't see it. Then realize it is just my turn signal being on. Would be good if that feature could be turned off and on. At least now I realize it is not only me.

I think that You need to find where those Cameras plug in to the Rearview Monitor. Unplug them and leave them . The next owner of Your Rig might want them to work so be sure to record what You have done in the Owners Manual ,or hang a note on the wires!