Slideout Problem

[wildbyon]

One of my large slideouts is hanging up on the top. It is dropping down below the wall face when opened all the way. When I close it it hangs up on the upper wall face and makes a loud bang as it forces its way open. Is there an adjustment to be made? I can't find a procedure for adjusting slides.

[wildbyon]

I've looked but the "Teflon" looking blocks seem to be in place. Would the slide have to come out to repair?

[donn0128]

Pull the carpet back and look for the nylon guides. Outside and look closely. Likely the guide rails have come loose and dropped.