DE88ROX wrote:
Ive read on here that some have re-mounted the pump on rubber washers to try and absorb some of the noise. have also read about people mounting them on old mouse pads.
Mine is a tad noisy as well. I have to remove a drawer to get good access to it. Haven't quite figured out to remove the drawer from the slide. Its not a big deal for me, so its one of those things i keep putting off
To get your drawer out: pull the drawer all the way out till it stops look underneath it from an area where you can see behind the drawers. (I can access mine from under the kitchen sink) Then take a screw driver and you will see a track ion the center of the drawer. right at the point where the drawer will no longer travel should be a small opening in that track. Use the screw driver to push up the small plastic tab that is up there and that most likely you cannot see. Pull the drawer while holding the screw driver in position.
It should come out.