12 volt buck/boost unit
For an appliance that requires four amps at 12 volts, what do I need to have it work with the 12VDC system. The catch is that the appliance needs 12 volts. Not 12.whatever, 13.x, or 11.x depending...
Forum Discussion
mlts22 wrote:I would use a sine wave inverter to power the brick if the thing is that fussy.
Apologies. I've not been much on the forums in a bit, due to work stuff. The device is a Synology DS216+ NAS, which uses 12 volts to power it. Too little or too much, it gets unhappy.
It is only 60 watts. Maybe 70 watts max with conversion losses.
Put another solar panel on the roof or add an extra battery.
