vermilye wrote:
I suggest you reset this brand of refrigerator monitor often. It does not give any indication that it has "hung" and is no longer updating the receiver. I returned one to the manufacturer & the replacement has the same problem. After 3-4 days, one of the channels stops updating. A reset fixes it, but only for a couple of days.
Interesting, If the transmitters battery gets low or out of range the receiver will error out on that channel and present an "E" in the display.
Never seen them just sit there, no update, just hung.
I have 3 sets that are original, about 4 years old. 1 in the camper, 1 in the home kitchen fridge and 1 in the shop fridge "beer n garden" storage. Not had a problem like you described. You do have to take care with the distance and wall of your fridge for signal penetration.
I purchased 2 sets for a friend. He struggled a bit with them until he found a good spot for the receiver and placement of the transmitters.
Another friend has 2 sets, no problems.
Jim