1980 Winnebago Brave - 17.5 Dually Rims
Hi new to RV.Net. I have a 1980 Winnebago Brave with a Chrysler chassis. Coming home from a wedding and there was a loud noise from the rear of the motorhome and as I am trying to safely pull off th...
Forum Discussion
Check with RicsonTruck.com
You will need your tire lug pattern size. Chances are that the factory rims where 16.5" and where replaced due to the load capacity being marginal many years ago. 17.5" rims are much stronger.
If you can only find 16.5" rims, then my suggestion is put them on the front axle (less weight per tire) and move all your good 17.5" rims to the back.
Good luck,
Fred.
You will need your tire lug pattern size. Chances are that the factory rims where 16.5" and where replaced due to the load capacity being marginal many years ago. 17.5" rims are much stronger.
If you can only find 16.5" rims, then my suggestion is put them on the front axle (less weight per tire) and move all your good 17.5" rims to the back.
Good luck,
Fred.
