smkettner wrote:
.8 vs .3 is .5 amp so NO that does not reconcile with coving the panels and losing 1.5 amps. And not sure how you have .3 going in with no solar.
I would check if that 1.5 amps is correct. Then disconnect the solar from the battery for the remainder of the tests.
Are you using a multimeter in series? You may need 2 decimal resolution to find this issue.
Yes I have the meter in series & I was just rounding off the amps. I am definitely confused, does the meter show only the amps being used, or a cobination of amps in (from solar) & amps used(Propane dector etc,)Thanks for the help. I have checked the batteries with a hydrometer & they are good. Thanks