Aquahot 450D not working on Electric side
Been out on the road for the past four months, primarily using the Aquahot Electric hot water system for showers etc. Yesterday it quit working. Still working fine on the diesel side, but nothing on t...
Forum Discussion
I just last week replaced the relay for the electric side on my aquahot. I saw on Roger Berke's website that they had a new relay conversion to replace the original one on my DP.
I used the schematic he emailed me and removed the old relay that had badly burnt wires, one was burnt off completely. Upon inspecting the schematic it wasn't even wired correctly at all, reason for burnt wires I guess. I had never used the electric side before this. Rewired relay and tested voltage to the element and now works great.
I used the schematic he emailed me and removed the old relay that had badly burnt wires, one was burnt off completely. Upon inspecting the schematic it wasn't even wired correctly at all, reason for burnt wires I guess. I had never used the electric side before this. Rewired relay and tested voltage to the element and now works great.
