Forum Discussion

Baja_Man's avatar
Baja_Man
Explorer
Sep 01, 2021

Are Ground Bonding Plugs required for Each Inverter/Genny?

I am installing a new Progressive Industries hard wired EMS (EMS-HW30C). I want to use a ground-neutral bonding plug on inverters/gennys to avoid using my by-pass function. I plan on using my ...
wa8yxm's avatar
wa8yxm
Explorer III
Sep 01, 2021
As I understand it the parallel link has only two wires to each generator. Thus you will need to bond at the 30 amp outlet in the P-link. Easiest way (if said assembly is not molded) is to open the outlet assembly and add a jumper.. Just make sure you jumper the PROPER (Neutral/Ground) pins.

Actually with inverter generators the Surge Guard is not needed so you an use the bypass mode safely.

But there is still a good reason to bond.

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,211 PostsLatest Activity: Mar 08, 2025