Forum Discussion

Baja_Man's avatar
Baja_Man
Explorer
Sep 01, 2021

Are Ground Bonding Plugs required for Each Inverter/Genny?

I am installing a new Progressive Industries hard wired EMS (EMS-HW30C). I want to use a ground-neutral bonding plug on inverters/gennys to avoid using my by-pass function. I plan on using my ...
BFL13's avatar
BFL13
Explorer II
Sep 01, 2021
wnjj wrote:
BFL13 wrote:
In the link for the Link it shows the yellow wires going to each gen's chassis ground lug.

How does the chassis ground for the gen connect to the gen's receptacles' neutrals by using the bonding plug unless the gen's chassis is connected to the receptacles' grounds?

Is that what wnjj meant above?

Yes, the ground pins on the 20A receptacle are connected internally to the ground lug, which is where you attach the parallel kit ground.


See my edit from the B&S manual above though.

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,211 PostsLatest Activity: Mar 08, 2025