Atwood Water Heater won't stay lit.
I have an Atwood GC6AA-10E Water Heater. Since I got the trailer last summer, the hot water heater won't work on gas. It will light, run for 2 or 3 seconds and turn off. If I bypass the controls an...
Forum Discussion
The electrodes need to be in the flame- temperature does not matter, being in the flame matters, as the board passes a very small electrical current through the flame.
It is possible that the board is actually bad- I have had some test good, but fail in use.
It is possible that the board is actually bad- I have had some test good, but fail in use.
