Bobbo wrote:
This impact wrench is the one I use, but I have a lot of the tools that use that same battery and charger. It claims 300 ft-lbs of torque.
I use the same Ryobi 1/2" impact driver for the lug nuts on truck and trailer. They come off easily with that tool, and when I put them back on, I only snug them with the driver, then torque them properly with a torque wrench.
For those who complain about noise, these impact drivers don't make any hammering noise unless they're put under a pretty severe load. Running stabilizer jacks down isn't going to make them go loud until you actually take the weight of the camper on the jack. Even then, it's probably not as loud as your idling diesel truck engine, or your radio, or your open-frame contractor generator, or your drunken friends, or your free-range children, or your barking mutts. :)
