Blocking tv chanels

JohnG3 wrote:
So when one breaks camp and moves to a different area are the channels from the last campground still blocked or does disconnecting the AC power return to all channels?

Every time you change locations with a different des of chsnnels you have to rescan or you get nothing.

I wish there was a way to ADD channels. Lots of times if I scan 'this direction' I get a set of channels but when I rotate the antenna I get a different set. None of my 4 TVs has a way to ADD a channel.

I have about a 12 tv's between home, rv and lake house. Out of those I only know of one that can add channels on a scan without losing those that were there already. I can't remember the brand.

I think this it different from the manual add/remove feature. That only works with the channels you have already scanned.

joebedford wrote:
I wish there was a way to ADD channels. Lots of times if I scan 'this direction' I get a set of channels but when I rotate the antenna I get a different set. None of my 4 TVs has a way to ADD a channel.

On my TV, at least, in the add/remove menu option, you can manually key in any channel number and then change it from removed to added. Likewise you can key in the number when watching TV even if it's no on the list of added channels. The list mainly just affects the channel up and down buttons.

I wish there was a way to ADD channels. Lots of times if I scan 'this direction' I get a set of channels but when I rotate the antenna I get a different set. None of my 4 TVs has a way to ADD a channel.

Moved from General RVing.

Maybe should have gone to Technology Corner.

Yes on most new TVs, you can delete them or make them favorites
It's a manual process, usually in the settings or scan menu someplace
This is good time to look at the TV operation booklet

My remote blocks channels I don't care to watch automatically when I press the CH + or CH - button on the remote. Sometimes I have to use the O/I button if the CH button doesn't work. :W

Most TV's and digital converters you can go to Setup. CHANNEL LIST and delete.

But Well. unless you are using some kind of Automated DVR. this should not be a problem (And on the DVR I can do it too).. Just don't watch the channels you can't watch.

As Drew said. You are not blocking the channels, but just taking them out of the list that show up when entering the channel numbers or doing the channel up/down.
When you do the rescanning processing, new location or even same location, you are restarting the process over.

edit add, at least that's the way my TV works.

Ken

Rescanning would usually reset the list of "valid" channels. The menu to deselect channels is typically just taking them off the list of channels the TV will go to; it's not blocking them permanently or anything like that. (Likewise, usually you can add channels to the list that the auto scan didn't pick up, or even build the list entirely manually if you're especially bored.)

As with anything, it's possible that things may occasionally differ between TVs.

So when one breaks camp and moves to a different area are the channels from the last campground still blocked or does disconnecting the AC power return to all channels?