j-d wrote:
Followup - In this picture, there are three sets of terminals. By "set" I mean within a black insulator.
In your A/C, does each "set" have at least one wire on it? I think you'll find a PTC Device across HERM and COM. If that's how yours is, check the SUPCO instructions against that information.
Yes on my capacitor it has at least one wire to each set of terminals. What I was trying to say that on the herm terminal
there is only one wire going to it so I can run a wire from the hard start capacitor to the empty one. The only other terminal
that has a empty one is the one marked fan.