Bedlam wrote:
I have a constant duty solenoid and 150A breaker under the truck hood going to a 2ga run to the receiver with an Anderson connector. My trailer batteries also have have 150A breaker to a short 2ga run and Anderson connector on the tongue so I get better vehicle charging.
My setup is slightly different because I also run 2-way power to my truck camper and have two banks of batteries in my truck in addition to the bank in the trailer.
.
.
.
As was already posted, it does not fully recharge my battery bank but it will bring it up before shore power or solar top them off with an intelligent charger.
A very nice, clean installation ! As long as you understand the limitations of your system and can live with them, you are fine.
Personally, I would go withe the
CTEK D250SA DC > DC Charger. They make an add-on device that can do high current charging if your TV can make the power.