Code 46 on onan hdkaj diesel genset
Could there be any other reason for a code 46 besides faulty controller. I have 12.8 volts at the genset terminals. And I've cleaned the ground strap. If not does anyone know of an alternative soluti...
Forum Discussion
I had the same problem. If you experienced low batteries and had to charge them or if you changed your batteries you may have the code 46. Before you take it In try the following to attempt to clear the code. Hold the start/stop button for 30 seconds and then run the genset for 15 minutes and then see if code has cleared. This worked for me.
