Delamination remediation
I have a small area of delamination just below the RV refrigerator outside access panel. If I remove the panel completely I would have room to put something in there to reglue the area. spraying woul...
Forum Discussion
Remediation begun. Took off the vent on Thursday airing out Delamination area. I guess I am going to go the epoxy route from West marine.
Building braces so that will be done before hand.
Used construction adhesive to mount wood backing onto thin Luan that covers Styrofoam. This way I can use SS screws and screw into something substantial. The area cannot be seen once vent cover is on.
Pouring epoxy tomorrow
Building braces so that will be done before hand.
Used construction adhesive to mount wood backing onto thin Luan that covers Styrofoam. This way I can use SS screws and screw into something substantial. The area cannot be seen once vent cover is on.
Pouring epoxy tomorrow
