DIY vs. "professional" maintenance
Took our 26' tow-behind to a local brake shop after reading advice on wheel bearing lubrication and deciding I didn't have the tools & talent. Watching "professional" perform jacking, hub-removal and...
Forum Discussion
If I were writing a DIY turtorial I would likely recommend replacement of seals and such only because of the cost/risk factor
Cost me noting to suggest you replace them v/s the risk of failure and law suit.
But if I were DOING the job myself...I might not replace them because the cost is no longer zero.
Cost me noting to suggest you replace them v/s the risk of failure and law suit.
But if I were DOING the job myself...I might not replace them because the cost is no longer zero.
