Dometic 2652 fine on 110v not on gas

jrichardparker wrote:
... should I feel solenoid opening and closing when voltage is applied?

Yes, and you should hear a klunk when it opens.

My RM2652 works fine on elect, not on propane replaced TC no change seems like solenoid valve not opening I do have voltage to solenoid should I feel solenoid opening and closing when voltage is applied?

Thanks for letting us know the outcome, it may help others down the road.

Well, thee verdict is in, it was the board, replaced the board and it fired up right away. Found out a guy at work has fixed these before so I am going to give him the board next week and see if he can fins out what failed.

Replaced the ignitor wire/electrode wire, still same issue.
Guess we wait till Thursday to find out what's the issue.
Thanks again for all of your assistance.

Dean

Would have bet on the TC. Learn something every day. Even at my age.:)
Hey Bounder, our model is a RM2652 while his is a DM2652. That's the difference. (I guess )

They ALL have a Thermocoupler. That said, an explanation.
The Thermocoupler MOST on this thread are talking about is the standard old school metal with 2 wires.
The Thermocoupler on MOST newer refers and water heaters are a Flame sense that is the same part that Ignites (the spark electrode) and ALSO senses the flame. It does double duty.
To the OP--- replace the Ignitor wire/spark electrode. That is your problem. Doug

Thanks for all the tips, the model is a DM2652, no thermocouple, will definitely update the thread with what the service tech finds, hate waiting a week to find out.

Well, I know my 2652 has a thermocouple because I have changed it once.........but, it is a 1999 model.......The OP's is a 2007.....what a difference 8 years makes.......


So, I guess my guarantee is worth exactly what you paid for it:B


Please be sure and come back and update us with what your service tech finds.......

There may NOT be a thermocouple, contrary to my previous opinion and my experience with my own 2652.

THIS LINK is a PDF for troubleshooting, aka "DIAGNOSTIC SERVICE MANUAL".

Down on page 17 is this:

Units that have integrated igniter do not have a thermocouple. The igniter senses the flame thru the electrode and communicates with the lower main control. The integrated igniter used on certain Dometic model refrigerators operates on 12 volt DC thru the control board. On gas operation the igniter senses the resistance through the flame between the electrode and burner. When there is no flame at the burner, the resistance is high and the igniter begins sparking to light the burner. As soon as the flame is lit, the resistance between the electrode and burner drops and the igniter stops sparking. The resistance is monitored by the igniter, and, if for any reason the flame goes out, the igniter begins sparking until the burner is lit.

It seems the newer Dometic units may not have a thermocouple. I "assumed" they all did.