Dometic NDR1292 Frig Temperature
A year ago I replaced the board in my NDR 1292 with a Dinosaur brand because the frig would not operate when outside temp dropped below about 40 dgs. All has been well. Now in Arizona (where the last ...
Forum Discussion
1. Changing the Control board will NOT cause a refer to operate colder
2. The reason is simple---the control board responds to the thermistor and depending on the thermistor will turn the refer on and off
3. I would verify the rear cooling fans are operating. That is a symptom of your problem.
4. Is this refer in a slide room? Doug
2. The reason is simple---the control board responds to the thermistor and depending on the thermistor will turn the refer on and off
3. I would verify the rear cooling fans are operating. That is a symptom of your problem.
4. Is this refer in a slide room? Doug
