Eternabond over uncured Dicor lap sealant
I put Dicor self leveling sealant over the rear roof joint and all screw heads that runs across back of my Nash 22H trailer. It cured for about 2 1/2 hours or so while I worked elsewhere. I couldn't l...
Forum Discussion
The Dicor sealants are urethane based. They cure in the presence of water/humidity. Let the Dicor cure and then roll the tape again to release the micro-adhesives in the tape.
If the tape doesn't stick, remove it with a heat gun/hair dryer, scrape the Dicor off with a plastic spreader and caulk remover, clean the whole area with acetone, and apply the tape again correctly.
The reason God made beer was to slow down projects like this so a guy doesn't get carried away. Next time, more beer.
If the tape doesn't stick, remove it with a heat gun/hair dryer, scrape the Dicor off with a plastic spreader and caulk remover, clean the whole area with acetone, and apply the tape again correctly.
The reason God made beer was to slow down projects like this so a guy doesn't get carried away. Next time, more beer.
