Eternabond over uncured Dicor lap sealant
I put Dicor self leveling sealant over the rear roof joint and all screw heads that runs across back of my Nash 22H trailer. It cured for about 2 1/2 hours or so while I worked elsewhere. I couldn't l...
Forum Discussion
It does cure faster when hot, but covering it probably won't achieve anything.
Yes, it needs air to interact with sealant and fumes need to evaporate. Shortly after it's skinned, you might notice unsightly bubbles here and there, forming up and bursting, like a pancake on a hot pan.
Not all the sealants are created equal. When I used Geocel roof sealant, there was no bubbles at all, and it skinned and cured faster.
Yes, it needs air to interact with sealant and fumes need to evaporate. Shortly after it's skinned, you might notice unsightly bubbles here and there, forming up and bursting, like a pancake on a hot pan.
Not all the sealants are created equal. When I used Geocel roof sealant, there was no bubbles at all, and it skinned and cured faster.
