EZ Flex Dexter broken suspension bolt
Here's something new to look for: Both ends of the bolt (& nut) were there but on my pre-drive inspection I noticed that the ends were not lined up. Anyway, it snapped in the middle where the...
Forum Discussion
I put my grease gun on the broken bolt and with very little pressure, old grease came out.
In my opinion, the center hole in this bolt was drilled too far and that's why it broke. It looks like the hole is about 3/4 across the bolt.
In my opinion, the center hole in this bolt was drilled too far and that's why it broke. It looks like the hole is about 3/4 across the bolt.
