Fridge - fails to light on consistently.
I have a Norcold N821L fridge in my trailer. This weekend it showed a "F" fault which is failure of the flame to light. I checked the propane and there is lots, cleaned the burner and chimney and re...
Forum Discussion
ScottG wrote:
Check to make sure the flame sensor is correctly positioned and clean the carbon off it with solvent, emory paper or a brass brush.
Spark electrode does more then just provide a high voltage spark to ignite main flame BUT is also used to 'PROVE' main flame has lit and stays lit
Spark electrode has to be clean of any soot or carbon build up
Spark electrode has to be 'engulfed' in main flame-----tip hot
Spark electrode needs to have good clean strong ground contact
Spark electrode gap S/B 1/8" - 3/16"
