Sorry, I’ve been away! It’s NG 35kbtuh ECM induced draft 96%/condensing 120vac 2016 model. I retired from HVAC but the older Models that I was trained on had different ECM motors. They were all 1 hp and the speeds were selected with dip switches. Even those motors only drew 75 W on half speed. This tiny furnace that I have has three selectable speeds by switching taps on the motor and the wattage will be super low. The furnace and stat do nothing when connected to the generator.
This generator was new in about 2010. Now that you guys mentioned it. I made a pigtail with the neutral and ground bonded for some thing but I don’t remember what, but I know it had to be some thing for camping… My charger wizard or some thing in this trailer.
It’s nice that all these later appliances have such low power demand. Refrigerators even use PSC compressor motors and draw less than 2 A. Extension cord size won’t a problem… I have up to 4 gauge.
That’s a great tip on the bonded connector. I’ll try it in January when I’m back in Colorado. Thanks a million!! Craig
