how big of an inverter for Direct TV
As I've mentioned on other threads, I'm looking to install an inverter to run my Direct TV components from my batteries. I asked around, called the companies, and determined that; My TV uses abo...
Forum Discussion
smkettner wrote:
I recommend 300w sine wave. 300w is plenty and the wiring is simplified due to the lower power vs 600w+. Should be able to use existing battery feed to the panel and a small transfer switch to put 120v power in the existing tv branch circuit. No wire to pull, just make connections.
GoPower has low idle current draw and a provision for a remote power switch.
Sweet.
Question; does it have any way to use a 12v plug, as in the 'cigarette lighter' type plug to power it? That sure would make my installation far easier.
