How much grease for wheel bearings?
I have run into this problem more then once over the years with boat and camping trailers. Over greasing zerk fitting on wheels and pushing grease through the seals and getting grease into brakes. ...
Forum Discussion
Huntindog is correct, you would need a complete exchange of grease, not just an observation of fresh grease coming out. Even after pumping tubes of grease in, there is no way to know that there may be some old remaining.
I simply clean and hand pack at each brake inspection. To call a hole drilled in an axle with a zerk stuck in it a system is just advertising hype.
I simply clean and hand pack at each brake inspection. To call a hole drilled in an axle with a zerk stuck in it a system is just advertising hype.
