Installing a 12V ceiling fan
I have a new Jayco 5th wheel and would like to install a 4 blade ceiling fan in the rear living/kitchen area. There are already several 12V lights in the ceiling, so I think picking up power for the f...
Forum Discussion
I just installed one from Global Electric Products.
I disconnected the light (ultimately relocated it) but then tied a pull string to the 12V and pulled it back to the switch. I then mounted the fan switch next to it and used the pull cord to pull both wires back. I mounted a board above where the light was for the fan to mount to.
On my 12V ceiling fan, it has more than just power/ground (can't remember if it has three or four wires).
I disconnected the light (ultimately relocated it) but then tied a pull string to the 12V and pulled it back to the switch. I then mounted the fan switch next to it and used the pull cord to pull both wires back. I mounted a board above where the light was for the fan to mount to.
On my 12V ceiling fan, it has more than just power/ground (can't remember if it has three or four wires).
