Is it normal to cut the roof supports?
Was on the roof resealing the lap sealant and noticed the shower dome was sinking. Couple days later i replaced the bathroom vent cover and see that they cut the actual roof support. The previous ...
Forum Discussion
They used 1 staple and completely missed.
This is facing the outside wall. Should i shim the plywood back flat so that the skylight doesnt sink down at that spot? Or best to leave it since it was stapled and sealed in that position?
This is facing the outside wall. Should i shim the plywood back flat so that the skylight doesnt sink down at that spot? Or best to leave it since it was stapled and sealed in that position?
